Configure Palm Gesture (PalmGesture.ini)

You can set palm gesture for each application using PalmGesture.ini.


NOTE:  This feature is only valid during single palm/point operation.

Tutorial Video



Instructions for using palm gesture

The following gestures are available for use.

Gesture
Description
Left circle After the virtual cursor is displayed, move the virtual cursor counter clockwise.

Hint: The best moving speed is making a circle per second and the radius should be about 30cm
Right circle  (Clockwise) After the virtual cursor is displayed, move the virtual cursor clockwise
Right Flip After the virtual cursor is displayed, move to left side of screen and stop, then move (flip) the virtual cursor to right until virtual cursor disappears.
Left Flip After the virtual cursor is displayed, move to right side of screen and stop, then move (flip) the virtual cursor to left until virtual cursor disappears.
Tap and Drag After the virtual cursor is displayed, pushing your palm about 10cm towards the camera will turn drag mode ON.  Moving your palm back to the original position (distance) will turn drag mode OFF.

  Icon will be displayed next to Virtual cursor while drag mode with Mouse Left button is operated.

Icon will be displayed next to virtual cursor while drag mode with Touch event is operated.

Destination of PalmGesture.ini

PalmGesture.ini should be saved in C:\ProgramData\aeroTAP folder or the same folder as aeroTAP.exe.

Notes: C:\ProgramData\aeroTAP folder is given priority

Configure PalmGesture.ini

Configuring PalmGesture.ini file, will enable Palm gesture. You can set palm gesture for each application.

Description of Syntax:
[Application Name{:Caption Name}]
Counter Clockwise, Clockwise, Right Flip, Left Flip action, Tap and Drag (Default value is 0)
Tap and Drag: Value 1 - Drag mode by Mouse Left button, Value 2 - Drag mode by Touch Event
Hints: For more information about Application file name, see  Application name for the virtual button setting page


Ex:
[Chrome.exe]
135,134,146,147
Ex: The following example defines Tap and Drag action on Google Earth screen running on Chrome.exe.
[Chrome.exe:Google Earth]
40,39,0,0,2


Action Number

You can check for the assigned action numbers at KeyActionList.exe.